The new Piranha, Joost Kolken, Holland

Re: The new Piranha, Joost Kolken, Holland

Postby joost » Sun May 09, 2010 11:29 pm

Ja daar zat ik ook al aan te denken ik zal het even na meten.
En als dit niet het geval is ga ik er denk 2 mm afdraaien en aan de andere kant een ring van 2 mm dik zodat ze aandrijf assen alles weer opsluiten.
User avatar
joost
Trax II
 
Posts: 204
Joined: Sat Dec 13, 2008 2:03 am
Location: Holland

Re: The new Piranha, Joost Kolken, Holland

Postby joost » Sun May 16, 2010 7:01 pm

I have fixed the problem with the sprocket.

I have made a adjuster backing plate of 3mm thick.
and i have placed it between the bearing and the other adjuster backing plate.
and i have made a spacer of 3mm thick that i have placed between the drive shaft and the sprocket hub.

Is that the best solution Tony?

Image
Image
Image
Image
User avatar
joost
Trax II
 
Posts: 204
Joined: Sat Dec 13, 2008 2:03 am
Location: Holland

Re: The new Piranha, Joost Kolken, Holland

Postby Tony » Mon May 17, 2010 12:35 pm

Did you not line up the two sprockets when you mounted the engine?
On a standard instalation the chain is very close to the arm but does not touch.
"There can't be a practical reason for believing in what isn't true" – Sir Bertrand Russell.
User avatar
Tony
Administrator
 
Posts: 5861
Joined: Mon Feb 27, 2006 11:07 am
Location: Perth, Western Australia

Re: The new Piranha, Joost Kolken, Holland

Postby joost » Mon May 17, 2010 5:19 pm

The engine isn't mouted on that picture.
I have fisrt placed the rear sprocket in the right postion with that adjuster backingplate, and after that i have lined up the 2 sprockets.

Some pictures
Image
Image
Image
Image
User avatar
joost
Trax II
 
Posts: 204
Joined: Sat Dec 13, 2008 2:03 am
Location: Holland

Re: The new Piranha, Joost Kolken, Holland

Postby Rustydog2010 » Sun Nov 14, 2010 8:03 am

Looking good Joost, have you got any updates? She must almost be running by now?
Building GPZ750 Piranha.
Slowly... Very Slowly
Rustydog2010
Raven
 
Posts: 57
Joined: Sun Jan 31, 2010 2:25 pm
Location: Auckland NZ

Re: The new Piranha, Joost Kolken, Holland

Postby joost » Mon Nov 15, 2010 12:24 am

He,

it's a long time since my last post, but i was verry buzzy with my education.
so here some new pictures
next week i will buy some new stainless steel for the exhaust.
And i'm going to look for a new oil cooler and water cooler.

And about the fire wall, what is a good material for that?

Image
Image
Image
Image

Image
Image
Image

I'am making my own one turn lock steering collum

Image
Image
Image

some exhaust work form the old bike exhaust this is only the prototype.
User avatar
joost
Trax II
 
Posts: 204
Joined: Sat Dec 13, 2008 2:03 am
Location: Holland

Re: The new Piranha, Joost Kolken, Holland

Postby Bluezone » Mon Nov 15, 2010 5:44 pm

Hay man. nice work. What re your front hubs/stubs off. They got mounts for a disc?
Bluezone
Piranha
 
Posts: 1698
Joined: Mon Jun 02, 2008 6:54 pm

Re: The new Piranha, Joost Kolken, Holland

Postby joost » Mon Nov 15, 2010 7:09 pm

Thanks, I have the aluminium Edge hubs
User avatar
joost
Trax II
 
Posts: 204
Joined: Sat Dec 13, 2008 2:03 am
Location: Holland

Re: The new Piranha, Joost Kolken, Holland

Postby mike k » Thu Nov 25, 2010 8:28 am

joost wrote:He,

it's a long time since my last post, but i was verry buzzy with my education.
so here some new pictures
next week i will buy some new stainless steel for the exhaust.
And i'm going to look for a new oil cooler and water cooler.

And about the fire wall, what is a good material for that?

Image
[my own one turn lock steering collum

[some exhaust work form the old bike exhaust this is only the prototype.



looking at the photo with u in it have yuo got NO brace bar to the centre of the lower chassis
may be the angle of the photo


mike
mike k
Fun Kart
 
Posts: 156
Joined: Wed May 17, 2006 4:04 am
Location: wirral uk

Re: The new Piranha, Joost Kolken, Holland

Postby joost » Thu Nov 25, 2010 10:39 pm

You mean the bar that you see on this photo?

Image
User avatar
joost
Trax II
 
Posts: 204
Joined: Sat Dec 13, 2008 2:03 am
Location: Holland

Re: The new Piranha, Joost Kolken, Holland

Postby rossco » Fri Nov 26, 2010 12:08 am

I think he means in front of the seat rails.
Honda XLV650 Piranha
Pist'n Broke Racing
User avatar
rossco
Trax II
 
Posts: 280
Joined: Sun Nov 16, 2008 3:43 pm
Location: Baldivis, WA

Re: The new Piranha, Joost Kolken, Holland

Postby mike k » Fri Nov 26, 2010 12:38 am

yes under the seat think i woud be fab ing some up

looking good keep up the work

mike
mike k
Fun Kart
 
Posts: 156
Joined: Wed May 17, 2006 4:04 am
Location: wirral uk

Re: The new Piranha, Joost Kolken, Holland

Postby joost » Fri Nov 26, 2010 10:15 pm

Okee, first i want to mount the floor pan and the pedals.
User avatar
joost
Trax II
 
Posts: 204
Joined: Sat Dec 13, 2008 2:03 am
Location: Holland

Re: The new Piranha, Joost Kolken, Holland

Postby tonka » Sun Dec 05, 2010 10:33 pm

he joost how is it going.
looking good men,i only think that you have to flip the steering box upsidedown, or else yuor going to steer to the left but your wheels will go to the right :shock:
hmmm
tonka
Raven
 
Posts: 62
Joined: Sat Jun 02, 2007 6:12 am
Location: netherlands

Re: The new Piranha, Joost Kolken, Holland

Postby joost » Tue Dec 07, 2010 2:38 am

Yes i know. I have flipt it for the detail of the picture.
How is your buggy?
Do you have some more new pictures?
User avatar
joost
Trax II
 
Posts: 204
Joined: Sat Dec 13, 2008 2:03 am
Location: Holland

Re: The new Piranha, Joost Kolken, Holland

Postby tonka » Tue Dec 07, 2010 7:32 am

going o along nicely,engine mounted and stainless exhaust fitted.
will send you some photos this week.
ton
hmmm
tonka
Raven
 
Posts: 62
Joined: Sat Jun 02, 2007 6:12 am
Location: netherlands

Re: The new Piranha, Joost Kolken, Holland

Postby joost » Mon Jan 10, 2011 7:54 am

Here some more updates. Next week my exhaust bends will be arive.

Image
2 mm alu panel work.

Image
Image
Image
15 liter fuel tank.
User avatar
joost
Trax II
 
Posts: 204
Joined: Sat Dec 13, 2008 2:03 am
Location: Holland

Re: The new Piranha, Joost Kolken, Holland

Postby chopper » Tue Jan 11, 2011 9:22 pm

lookin good joost, keep up the good work
chopper
Taipan
 
Posts: 638
Joined: Wed Sep 30, 2009 1:28 am
Location: melbourne

Re: The new Piranha, Joost Kolken, Holland

Postby Toyz@Large » Thu Jan 13, 2011 2:17 pm

Trick lookin pedals........tanks looks like its gunna be a good job too :D
As light travels faster than sound, people appear bright until you hear them speak
http://s185.photobucket.com/albums/x87/ ... a%20Build/
User avatar
Toyz@Large
Trax II
 
Posts: 488
Joined: Fri Jun 22, 2007 3:15 pm
Location: Bucca, Queensland

Re: The new Piranha, Joost Kolken, Holland

Postby ErwinBnl » Fri Jan 14, 2011 9:23 am

Nice!

Finally some progress!! :D

Your pedal, fuel tank and panels are looking good 8)
Where do you get your fuel tank cap and fuel hose connections from?

Erwin
ErwinBnl
Registered Member
 
Posts: 15
Joined: Mon Jan 11, 2010 6:32 pm

PreviousNext

Return to Tell Us About Your Ride !

Who is online

Users browsing this forum: No registered users and 2 guests

cron