Devil finds work for idle hands

Devil finds work for idle hands

Postby finggers » Mon Apr 07, 2008 10:46 pm

Here we go again .
Image
Image
third time lucky . thats about twelve hours work
hope to keep this thread running and keep you posted .
never did it for the last two piranha's :wink:
If it doesn't burn fossil fuels it aint a sport !!!
User avatar
finggers
Taipan
 
Posts: 623
Joined: Fri Jul 06, 2007 12:32 am
Location: newnorcia

Postby Sean (Foggy) Leggett » Mon Apr 07, 2008 10:53 pm

12 hrs :shock: Wow, doing well mate!!! You will be finished in no time, especially now you have had a little cash injection from selling your Piranha! :D
Cheers,
Foggy
ZX14 powered CudaX Image

Sold!!!!!
http://www.dreeme.com
http://www.seqmbc.com
User avatar
Sean (Foggy) Leggett
Piranha
 
Posts: 1515
Joined: Thu Apr 20, 2006 11:02 pm
Location: Brisney Land Qld Australia

Postby Jet » Tue Apr 08, 2008 12:59 am

Holy crap! no messing around in your workshop!
looks nice!
<a href="http://www.digrite.com.au/racing#!digrite-racing/c23vw">Check out the latest video and Pictures from Digrite Racing</a>
User avatar
Jet
Barracuda
 
Posts: 3798
Joined: Mon Apr 30, 2007 12:11 am
Location: Perth WA

Postby ALinOhio » Tue Apr 08, 2008 12:31 pm

Only 12 hours ? Wow, need a job ? You could start where I work on Monday for sure! :O) Great work in just a little time, can't wait to see what the next 48 hours or so will get from ya. AL
ALinOhio
Fun Kart
 
Posts: 108
Joined: Fri Oct 05, 2007 5:37 pm
Location: USA

Postby finggers » Tue Apr 08, 2008 3:54 pm

I must say thats only cutting and weldind time .
the roll bar and nose were pre bent by edge because i couldn't bend them on a tight enough radius to look good . And the rear housing is part of the laser cut kit , so few corners have been cut . :wink: :D
can't afford to drag my feet .
If it doesn't burn fossil fuels it aint a sport !!!
User avatar
finggers
Taipan
 
Posts: 623
Joined: Fri Jul 06, 2007 12:32 am
Location: newnorcia

Postby Gsx550taipan » Tue Apr 08, 2008 6:23 pm

mate can you biuld one for me too. looks great any colour scheme you aiming at??? stil got heaps done in 12 hours.

cheers... michael
____________________
SeRiOuS Boys plAy wIth seriOus ToYs......
"tyres are like tits you play with them for a while then you just want bigger ones"
User avatar
Gsx550taipan
Sidewinder Plus
 
Posts: 1017
Joined: Wed Apr 26, 2006 4:50 pm
Location: Roxby Downs

Postby monty » Tue Apr 08, 2008 6:41 pm

at this rate ian u will have it done by the 26 :twisted:
at 12,500rpm
no one can hear you scream

piranha zx10 ninja
User avatar
monty
Taipan
 
Posts: 876
Joined: Wed May 23, 2007 9:18 pm
Location: PERTH AUS

Postby Cpo » Tue Apr 08, 2008 8:22 pm

Ian have you got a motor yet?
User avatar
Cpo
Taipan
 
Posts: 994
Joined: Sat Mar 25, 2006 1:19 pm
Location: Western Australia

Postby Ray » Tue Apr 08, 2008 9:57 pm

So you have were playing with your Trinketts and now( Your words not mine ! )
They look like a Barra Frame ( have you got any Pommy words for this stage? )
That Cracked me up
Well done if you keep it up, it will be there before Mine :lol:
User avatar
Ray
Taipan
 
Posts: 603
Joined: Wed Nov 08, 2006 7:59 pm
Location: Perth WA

Postby finggers » Tue Apr 08, 2008 10:23 pm

Not got my hands on a motor yet :!:
Well at least i dont own one yet :wink: :D
If it doesn't burn fossil fuels it aint a sport !!!
User avatar
finggers
Taipan
 
Posts: 623
Joined: Fri Jul 06, 2007 12:32 am
Location: newnorcia

Postby finggers » Tue Apr 08, 2008 10:34 pm

As for the colour :!: Might have to do the same as the piranha , really like that colour. and besides it has to match the blue light whip 8)
If it doesn't burn fossil fuels it aint a sport !!!
User avatar
finggers
Taipan
 
Posts: 623
Joined: Fri Jul 06, 2007 12:32 am
Location: newnorcia

Postby monty » Wed Apr 09, 2008 12:29 am

get won of these for a motor ian
http://cgi.ebay.com.au/ALLOY-49CC-2-STR ... dZViewItem
heaps of horse power :wink:
at 12,500rpm
no one can hear you scream

piranha zx10 ninja
User avatar
monty
Taipan
 
Posts: 876
Joined: Wed May 23, 2007 9:18 pm
Location: PERTH AUS

Postby finggers » Wed Apr 09, 2008 12:36 am

One two stroke pinging round the track is enough :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol:
I know exactly whats going in . It just needs to land in WA and be picked up . :wink:
If it doesn't burn fossil fuels it aint a sport !!!
User avatar
finggers
Taipan
 
Posts: 623
Joined: Fri Jul 06, 2007 12:32 am
Location: newnorcia

Postby Tony » Wed Apr 09, 2008 12:40 am

And hopefully it will be this week.
Can't wait to see this muther!
"There can't be a practical reason for believing in what isn't true" – Sir Bertrand Russell.
User avatar
Tony
Administrator
 
Posts: 5861
Joined: Mon Feb 27, 2006 11:07 am
Location: Perth, Western Australia

Postby finggers » Wed Apr 09, 2008 12:43 am

You and me both . :D
you think i can sleep at night :D :D :D
just hope i'm not going to need a shoe horn to prise it in .
If it doesn't burn fossil fuels it aint a sport !!!
User avatar
finggers
Taipan
 
Posts: 623
Joined: Fri Jul 06, 2007 12:32 am
Location: newnorcia

Postby monty » Wed Apr 09, 2008 12:51 am

im ghuesing
its ether going to b made buy

kawasaki
suzuki
honda
yamaha

and going to b a

500
600
700
800
900
1000
1100
1200
1300
or
1400

but im probably wrong :roll:
at 12,500rpm
no one can hear you scream

piranha zx10 ninja
User avatar
monty
Taipan
 
Posts: 876
Joined: Wed May 23, 2007 9:18 pm
Location: PERTH AUS

Postby Tony » Wed Apr 09, 2008 12:54 am

You may need to modify the rollbar lower braces to fit in the exhaust if it's that tight.
And then fit a firewall slightly forward of the rollbar.
"There can't be a practical reason for believing in what isn't true" – Sir Bertrand Russell.
User avatar
Tony
Administrator
 
Posts: 5861
Joined: Mon Feb 27, 2006 11:07 am
Location: Perth, Western Australia

Postby Badboy » Wed Apr 09, 2008 12:57 am

oh now cooommmeeee on you cant do that you guys suck!!!

talk about a tease!
Badboy
Trax II
 
Posts: 409
Joined: Tue Feb 20, 2007 11:47 pm
Location: Narrogin WA

Postby finggers » Wed Apr 09, 2008 1:36 am

monty , your spot on .
better not weld any bar work in the rear untill goliath is in place then :wink:
If it doesn't burn fossil fuels it aint a sport !!!
User avatar
finggers
Taipan
 
Posts: 623
Joined: Fri Jul 06, 2007 12:32 am
Location: newnorcia

Postby Tony » Wed Apr 09, 2008 2:47 pm

Ian, you will be pleased to know that your BIG donk has arrived.
And guess what.................its shorter than a Busa by about 30mm.
Much taller though, but that is not an issue.
May be a good idea to do some searching on the internet for a billet sump to get the sprocket location lower.
The exhaust outlets face fairly downward so the exhaust system should not take up much room.

Only three mounting points on each side though, which is strange.
But with cast in cylinders so the block is likely stiffer.

Your Fox shocks should be here Friday or Monday.
"There can't be a practical reason for believing in what isn't true" – Sir Bertrand Russell.
User avatar
Tony
Administrator
 
Posts: 5861
Joined: Mon Feb 27, 2006 11:07 am
Location: Perth, Western Australia

Next

Return to Tell Us About Your Ride !

Who is online

Users browsing this forum: No registered users and 2 guests

cron