New Trax 2

New Trax 2

Postby customwinder » Sun Dec 27, 2015 12:16 am

Hey guys finally got the mrs Trax 2 going. It's an angry little beast and goes very well. It has a 16 hp motor amd a torq a verter hanging off the motor for drive. I made some sidewinder pedals for it and made the rear section a bit bigger to accommodate the motor. The roll bars are a little different to the plans. I have them welded to the lower frame instead of bolted down. I made the lower section from 25 nb pipe instead of shs. Like the sidewinder just wanted something a little different. It's got brand new wheels and tyres. It has the rear axle and hubs and brakes all bought from the boys at Edge Products. I had to make an adapter for the sprocket that was supplied with the torq a verter. Also made some nerf bars similar to the winders. Looks pretty good.

We took it out for the first time today and everything went well. Nothing went wrong and the mrs putted around and loved it. She's never driven anything like this before and thought it was great. Got some pictures of it here.

Thanks for looking.
Attachments
20150526_121526.jpeg
20150526_121526.jpeg (68.7 KiB) Viewed 1918 times
customwinder
Raven
 
Posts: 55
Joined: Thu Jun 18, 2015 11:33 pm
Location: Brisbane -Australia

Re: New Trax 2

Postby customwinder » Sun Dec 27, 2015 12:19 am

Progress photos.
Attachments
20150602_121820.jpeg
20150602_121820.jpeg (71.96 KiB) Viewed 1917 times
customwinder
Raven
 
Posts: 55
Joined: Thu Jun 18, 2015 11:33 pm
Location: Brisbane -Australia

Re: New Trax 2

Postby customwinder » Sun Dec 27, 2015 12:22 am

Coming up looking good.
Attachments
20151207_163051.jpeg
20151207_163051.jpeg (79.8 KiB) Viewed 1917 times
20151209_064738.jpeg
20151209_064738.jpeg (73.06 KiB) Viewed 1917 times
customwinder
Raven
 
Posts: 55
Joined: Thu Jun 18, 2015 11:33 pm
Location: Brisbane -Australia

Re: New Trax 2

Postby customwinder » Sun Dec 27, 2015 12:24 am

Almost there
Attachments
20151210_122952.jpeg
20151210_122952.jpeg (70.65 KiB) Viewed 1917 times
20151209_131733.jpeg
20151209_131733.jpeg (70.65 KiB) Viewed 1917 times
customwinder
Raven
 
Posts: 55
Joined: Thu Jun 18, 2015 11:33 pm
Location: Brisbane -Australia

Re: New Trax 2

Postby customwinder » Sun Dec 27, 2015 12:26 am

Made the nrf bars at work and whacked them on in my garage at home.
Attachments
20151216_193855.jpeg
20151216_193855.jpeg (58.99 KiB) Viewed 1917 times
20151216_193906.jpeg
20151216_193906.jpeg (51.47 KiB) Viewed 1917 times
customwinder
Raven
 
Posts: 55
Joined: Thu Jun 18, 2015 11:33 pm
Location: Brisbane -Australia

Re: New Trax 2

Postby customwinder » Sun Dec 27, 2015 12:31 am

Got them loaded and ready for action.
Attachments
20151226_145054.jpeg
20151226_145054.jpeg (97.74 KiB) Viewed 1917 times
20151226_232755.jpeg
20151226_232755.jpeg (63.05 KiB) Viewed 1917 times
20151226_232741.jpeg
20151226_232741.jpeg (62.37 KiB) Viewed 1917 times
customwinder
Raven
 
Posts: 55
Joined: Thu Jun 18, 2015 11:33 pm
Location: Brisbane -Australia

Re: New Trax 2

Postby Corza19 » Sun Dec 27, 2015 12:52 pm

Looks the goods mate, great work!
"Drop a gear and disappear"
Corza19
Trax II
 
Posts: 275
Joined: Mon Dec 01, 2014 7:16 pm
Location: Victoria, Australia

Re: New Trax 2

Postby customwinder » Sun Jan 17, 2016 10:29 pm

https://youtu.be/cUoNs8if-24 Hey guys the little beast is going well. The mrs loves cruisin in it. Nothing too bad has gone wrong with it
Chain came off bit am making an adjuster for it. It stretched after the first few goes. Got some more photos and a video of it.
Attachments
20160102_130635.jpeg
20160102_130635.jpeg (107.12 KiB) Viewed 1870 times
20160102_130659.jpeg
20160102_130659.jpeg (105.86 KiB) Viewed 1870 times
20160102_130710.jpeg
20160102_130710.jpeg (110.49 KiB) Viewed 1870 times
customwinder
Raven
 
Posts: 55
Joined: Thu Jun 18, 2015 11:33 pm
Location: Brisbane -Australia


Return to Tell Us About Your Ride !

Who is online

Users browsing this forum: No registered users and 1 guest

cron