Antmans piranha

Re: Antmans piranha

Postby Antman » Sun May 29, 2016 12:57 am

Hi guys,
Yes Corza19 it is 2.5" steps down to 2" for secondary and 1.5" for primary pipes, sounds mint I'll post up a video for you.
As for update
Had some drama with FI light coming on every trip out, turned out I just needed to adjust the crank angle sensor a bit closer to its pickup.
I have not had any more problems with the drive line other than breaking a chain and torn CV boots, I still have the twisted stub axles but they have not gotten any worse since they first twisted.
I then re made my rear A arms to have adjustable toe and camber, my tires were copping a flogging on the inside so this sorted that out.
Also fitted a bigger thermo fan and a cowel for the radiator, this helped heaps with low speed cooling but made it get hot when going at higher speeds.
since then I removed the cowel but kept the larger fan and all seams great now .
I have also made an air ram intake on the roof and this has been great taking the intake noise away from the back of my helmet.
At the moment I am replacing the rear shocks since blowing an oil seal and having a small fire when the shock oil sprayed over the exhaust :shock: but no damage just a mess.
I would like to change the front to a double A arm setup but thinking of building an X2 instead.

Enjoy the new pics :D
ANT'S TIG N TRICK'S
0431198660

For all your coded TIG needs & 3D AUTO CAD service's in Ellenbrook
User avatar
Antman
Raven
 
Posts: 70
Joined: Fri Jan 20, 2012 9:27 pm
Location: Ellenbrook, WA

Re: Antmans piranha

Postby Antman » Sun May 29, 2016 1:02 am

Image
Image
Image
Image
ANT'S TIG N TRICK'S
0431198660

For all your coded TIG needs & 3D AUTO CAD service's in Ellenbrook
User avatar
Antman
Raven
 
Posts: 70
Joined: Fri Jan 20, 2012 9:27 pm
Location: Ellenbrook, WA

Re: Antmans piranha

Postby Antman » Sun May 29, 2016 1:05 am

Image
Image
Image
Image
Image
Image
ANT'S TIG N TRICK'S
0431198660

For all your coded TIG needs & 3D AUTO CAD service's in Ellenbrook
User avatar
Antman
Raven
 
Posts: 70
Joined: Fri Jan 20, 2012 9:27 pm
Location: Ellenbrook, WA

Re: Antmans piranha

Postby Antman » Sun May 29, 2016 1:07 am

Image
Image
Image
ANT'S TIG N TRICK'S
0431198660

For all your coded TIG needs & 3D AUTO CAD service's in Ellenbrook
User avatar
Antman
Raven
 
Posts: 70
Joined: Fri Jan 20, 2012 9:27 pm
Location: Ellenbrook, WA

Re: Antmans piranha

Postby Antman » Sun May 29, 2016 1:09 am

Turn your sound up for the videos !!!
Image
Image
ANT'S TIG N TRICK'S
0431198660

For all your coded TIG needs & 3D AUTO CAD service's in Ellenbrook
User avatar
Antman
Raven
 
Posts: 70
Joined: Fri Jan 20, 2012 9:27 pm
Location: Ellenbrook, WA

Re: Antmans piranha

Postby Corza19 » Sun May 29, 2016 6:18 pm

New arms and the intake looks great mate!

Exhaust does sound wicked! Must be ear piercingly loud in person! hahah

I think the double A arm front would be the way to go; but an X2 would be pretty cool I reckon.
"Drop a gear and disappear"
Corza19
Trax II
 
Posts: 276
Joined: Mon Dec 01, 2014 7:16 pm
Location: Victoria, Australia

Re: Antmans piranha

Postby Corza19 » Fri Dec 30, 2016 11:39 pm

Hey Antman,

Just been going through your thread and I'm wondering what the black fittings at the bottom of your eclectics box are and where you got them from?
Image

Cheers
"Drop a gear and disappear"
Corza19
Trax II
 
Posts: 276
Joined: Mon Dec 01, 2014 7:16 pm
Location: Victoria, Australia

Re: Antmans piranha

Postby Antman » Fri Jan 06, 2017 9:56 pm

Hi Corza,

There just cable glands from ashdowns, tho any shop with auto electrical supplies normally vary them to
ANT'S TIG N TRICK'S
0431198660

For all your coded TIG needs & 3D AUTO CAD service's in Ellenbrook
User avatar
Antman
Raven
 
Posts: 70
Joined: Fri Jan 20, 2012 9:27 pm
Location: Ellenbrook, WA

Re: Antmans piranha

Postby Corza19 » Sat Jan 07, 2017 9:47 pm

Thanks mate!

I've just got a K5 GSXR1000 for my Cuda, so stealing a couple ideas from your thread ;)

Did you end up having to run an idler sprocket?? The sump is a bit of a sh#t shape hahah

Cheers
"Drop a gear and disappear"
Corza19
Trax II
 
Posts: 276
Joined: Mon Dec 01, 2014 7:16 pm
Location: Victoria, Australia

Previous

Return to Tell Us About Your Ride !

Who is online

Users browsing this forum: Bing [Bot] and 1 guest