wiring harness

Need a spark. All those tedious electrics, lights, tacho, wiring harness, etc

wiring harness

Postby brendon18 » Tue Apr 16, 2013 2:17 am

what do you normally wrap your wiring harness in and what are some tips??
brendon18
Raven
 
Posts: 69
Joined: Mon Apr 01, 2013 3:33 pm
Location: Toronto NSW Australia

Re: wiring harness

Postby keepthedirtflying » Tue Apr 16, 2013 8:49 pm

Heat Shrink, and use a small blow torch, be very careful not to over heat it.

Hope this helps?
keepthedirtflying
Trax II
 
Posts: 427
Joined: Sat Dec 24, 2011 12:23 am

Re: wiring harness

Postby brendon18 » Tue Apr 16, 2013 10:20 pm

yeah already made the harness i soldered all the joints and heat shrink them whats the best thing to wrap the harness split tube and tape or split tube and a couple cable ties here and there??
brendon18
Raven
 
Posts: 69
Joined: Mon Apr 01, 2013 3:33 pm
Location: Toronto NSW Australia

Re: wiring harness

Postby Drew79 » Tue Apr 16, 2013 10:23 pm

we use split tube at work, heat shrink over split tube on ends and tape in sections along tube.
Drew79
Raven
 
Posts: 71
Joined: Sun Mar 18, 2012 10:26 pm
Location: Kelmscott WA

Re: wiring harness

Postby brendon18 » Tue Apr 16, 2013 10:26 pm

just another thing i have a led temp gauge when i turn the key on it comes like it should but when i start the engine the gauge goes off
brendon18
Raven
 
Posts: 69
Joined: Mon Apr 01, 2013 3:33 pm
Location: Toronto NSW Australia


Return to Electrics

Who is online

Users browsing this forum: No registered users and 1 guest